FEM Aluminum Foil Embossing Machine/ Paper Embossing Machine

* Designed for surface embossing on beer labels, aluminum foil for tobacco packaging, various beverage labels, book cover, envelops, invitation cards, congratulatory cards, packaging paper boxes. The foil/paper embossing machine will upgrade outlook effect and product quality level.

* Applicable packaging materials include paper laminate, metalized paper, aluminum foil / paper, composite film etc. The surface embossing machine not only provides attractive beauty, but also greatly increases visual effect.

■ Unwind Diameter (mm) (max.) 1,000

■ Material Width (mm) 600 - 1,200

■ Paper Core Inner Diameter (mm) 76 / 3"

■ Rewinding Type Center rewinding with single shaft

■ Mechanical Speed (m/min.) 0 - 150

FLM Dry Laminating Machine

The FLM Dry Laminating Machine is specially designed for roll laminating operations of flexible packaging materials such as BOPP, CPP, PET, PE, Nylon, Aluminum Foil, and a variety of multi-layer films as well as performing surface treatment.

Features:

1. This series of laminators are designed for great production efficiency at a lower investment level. The

machine is very easy to operate and can be easily used by those with printing machine operation skills.

2. Tension problems during the laminating process are eliminated by use of the micro location offset via dancing roller control systems, which allow for foil (6 micron) laminate with other various films. It provides the most stable tension even the material has passed through the dryer and affected by the temperature.

3. The synchronized motion of the laminating and gluing devices is of a non-shaft design which fully eliminates accumulated tolerance and facilitates the movement of both semi- and fully-completed products.

4. Laminating unit equipped with 10.4” colorful touch screen and PLC controller. The operation parameters such as unwind tension, rewind tension, temperature, motors speed are setting digitally. Machine auto stop

functions when material run out or break. All values setting and displaying are clear to make ease operation.

5. Gluing unit also equipped with LCD touch screen. It is convenient for machine pre-run setting such as glue adjustment, hot melt temperature, doctor blade movement and gravure coating roller clean device.

■ Patent roll width : 500-1000 mm

■ Patent roll diameter : 600mm

■ Coating method : Gravure mesh rotary type

■ Laminating roll diameter : 800mm (Max.)

■ Mechanical speed : 0-150m/min

FSE Reversible Rewinding and Roll Inspecting Machine

The FSE-2 Roll Rewinding and Roll Inspecting machine is design for

1. Surface inspecting for all kind of round roll such as flexible packaging, electronics, TFT-LCD and optical materials.

2. Defective inspection of the printed film and laminates.

3. Convert small rolls into big rolls, or vice versa.

4. Re-reeling operation of slit roll with uneven edges or tension.

Features:

1. Equipped with shaft less unwind stand and web guiding system.

2. Twin servomotors drive system providing accurate control.

3. Employs micro-computer control system with LCD touch screen, ease for parameters setting.

4. Full automatic tension control system; only one tension value needed to set when operate.

5. Length memories and auto stop functions.

6. The winding direction could be changed in any time and forward / reverse jogging functions.

7. One machine with two functions: Install an optional trimming cutting unit for waste edges slitting.

■ Mechanical speed : 250 m/min

■ Unwind Width : 1000, 1300, 1600mm

■ Unwind diameter : 800mm

■ Rewind diameter : 800mm

FSH Heating Side-Sealing Slitter Rewinder

1. For Side Sealing Slitter Operations: Suitable for producing various film rolls for extruded materials, such as HDPE, LDPE, LLDPE, PP, CPP, and etc.. Product thickness range from 0.006 to 0.1 mm. Production speed 20-40 meters per minute in 2-6 lines (Slit width over 40mm).

2. For Regular Slitter Rewinder Operations: Suitable for slitting various materials, such as, cellophane, PET, OPP, CPP, PE, PS, PVC film rolls and printed films.

Features:

>>The slitting and side sealing mechanism employs exclusive electrical resistor knives. Once power is on, the knives are instantly heated to the normal working temperature for immediate operation.

>>The cantilever (swing out) rewind and unwind shafts can be easily handled by a single operator.

>>Length can be easily preset during operation. When the pre-set length is reached, the machine stops automatically.

>>Tension can be adjusted during operation and automatic tension controller is available.

■ Mechanical speed : Side sealing 20-40 m/min, slitting 100 m/min

■ Unwind width : 1000, 1200, 1500 mm

■ Unwind diameter : 600mm (Max.)

■ Rnwind diameter : 450mm (Max.)

■ Rewind width : 50 mm (Min.)

FSL-B Surface Winding Slitting Machine

Applications:

1. For slitting thin and slip plastic films of uniform thickness.

2. For slitting laminating paper, aluminum foil, isolated paper, labels, and other paper rolls.

3. For slitting electronics, computer and optical materials, film roll and foil roll.

Features:

>>Two sets of surface rewinding shafts ensure accurate slitting. Tension is fully adjustable, and length can be easily preset on the counter. With an adjustable rewinding shaft the machine is especially suited for the mass production of a single product.

>>Equipped with high performance PLC micro-processor combined with a LCD touch screen: The controller provides various functions, such as auto tension control for unwind & rewind, operation parameters memories, auto stop functions…

■ Mechanical speed : 0-200 m/min

■ Unwind width : 1000, 1300, 1600, 1800mm

■ Unwind diameter : 600mm (Max.)

■ Rewind diameter : 500mm (Max.)

■ Rewind width : 20mm (Min.)

FSL-D Small Roll Slitter

The Small Roll Slitter is ideal for slitting large parent roll into small bobbins such as POS, ATM, cash register, ticket / receipt, thermal paper, fax, lottery, medical report, and various paper roll for office use.

Features:

This Slitter features an exclusive, patented magnetic powder type surface rewinding device allowing product tension to be easily adjusted according to the type of material. It also reduces wear of the driving rubber wheels and employs the end roll warming device.

■ Mechanical speed : 0-150 m/min

■ Unwind width : 600, 800, 1000, 1300mm

■ Unwind diameter : 600mm

■ Rewind diameter : 150mm (Max.)

■ Rewind width : 20mm (Min.)

FSL-J Narrow Width Slitting Machine

For all kinds of high grade thin paper, cellophane, plastic film, and aluminum foil. Especially suitable for positive, and negative foils of condenser and electrolyze paper. For slitting electronics, computer and optical materials, film roll and foil roll.

Features:

The rollers are tightly arranged to decrease tolerance of cross and longitudinal winding of material. The winding and feeding motions are driven by a universal satellite gear transmission. The speed can be easily varied to accommodate tension difference caused by the changing diameter of the winding material.

■ Mechanical speed : 0-100 m/min

■ Unwind width : 600, 800mm

■ Unwind diameter : 500mm

■ Rewind diameter : 270mm (Max.)

■ Rewind width : 5mm (Min.)

FSL-KA Practical Type Slitter Rewinder

2009 HCI Newly develop slitter rewinder, the FSL-KA Series Slitter Rewinder is designed for slitting a wide variety of materials such as, cellophane, PET, OPP, CPP, PE, PVC, paper rolls, and printed materials.

The Integral Structure of FSL-KA Slitter Rewinder

This compact design occupies minimal floor space. Unwind and rewind is designed in same side providing the most convenient operation. Enlarge the roll capacity: unwind diameter can reach to 800mm; rewind diameter can reach to 500mm. Reducing the loading frequency and expanding the applied ranges.

Specifications FSL-KA1300 Slitter Rewinder

■ Mechanical Speed [m/min]: 300

■ Unwind Core Inner Diameter [mm]: 76 / 3" or 152 / 6"

■ Unwind Web Width [mm]: 320-1300

■ Maximum Unwind Diameter [mm]: 800

■ Unwind Tension Control: Magnetic Powder Brake With Load Cell Sensor

■ Web Guiding System: Printing Line / Edge

■ Guider Movement [mm]: +/- 70

■ Slitting Techniques: Razor In Groove Roller/ Shear Knives

■ Trim Removal: Blower with Trim Winder

■ Rewind Core Inner Diameter :[mm]: 76 / 3"

■ Minimum Rewind Web Width [mm]: 50

■ Maximum Rewind Diameter [mm]: 500

■ Rewind Tension Control: HCI Quick-Lock Type Individual Friction Winding Technology

FSL-T Superior Type Slitter Rewinder

The T series slitter is designed for slitting all types of flexible packaging films, photonics and optical materials. Such as cellophane, pet, opp, cpp, pe, pvc, paper rolls, counterfeit-proof labels. The HCI FSL-T series is a universal slitter rewinder on the market.

FEATURES:

»Shaftless & pneumatic-chuck unwind stand

»Web guiding system: Web edge & Printing line guiding

»Three motors winding

»Unwind auto tension control

»Pneumatic nip rubber roller

»Duo slitting techniques: Razor in groove roller & Shear knifes.

»Anti statics brushes

»Hci differential winding technology

»Individual lay-on roller

»Products discharge device

»PLC - programmable logic controller + LCD colorful touch screen.

■ Mechanical speed : 0-300 m/min

■ Unwind width : 1300 / 1600, 1800mm

■ Unwind diameter : 1000 / 800mm (Max.)

■ Rewind diameter : 600 / 450mm (Max.)

■ Rewind width : 50mm (Min.)

FSL-V Deluxe Type Slitting Machine

FSL-V Slitting Machine is specially designed for the plastic films which are of variable thicknesses, low tension demand or tension strictness. It is also suit for slitting a wide variety of materials such as, cellophane, PET, OPP, CPP, PE, PVC, paper roll, and printed films.

Specifications: FSL-V1300 Slitting Machine

■ Mechanical Speed (m/min): 400

■ Un. Stand: Shaftless with Pneumatic Chuck & Floating Type

■ Core Inner Diameter (mm): 76 / 3" or (152 / 6" Optional)

■ Web Width (mm): 320 - 1,300

■ Maximum Unwind Diameter (mm): 1,000

■ Un. Tension Control: Magnetic Powder Brake With Load Cell Sensor

■ Web Guiding System: Printing Line / Edge

■ Guider Movement (mm): +/- 50

■ Slitting Techniques: Razor In Groove Roller / Shear Knives

■ Trim Removal: Vacuum Type Trim Disposal

■ Minimum Re. Web Width (mm): 50

■ Maximum Re. Diameter (mm): 600

■ Rewind Tension Control: HCI Differential Winding Technology (Inner pressure type)

FSP Sleeve Rewinding and Inspection Machine - Reversible

HIGH SPEED / REVERSIBLE / MULTI-PURPOSES

The FSP-250-2 is an ideal re-reeling machine for round roll material inspecting process such as printing, surface or the seaming quality of shrink sleeves. 2 motors driven system and memorized reverse function allowed the winding direction changed during operation.

Sleeves Seaming Quality Checking Device

Which can fill the sleeve with air and examine the middle seaming of sleeve continuously. Incorporated with a detecting sensor, the machine will stop and reverse automatically if there is a leakage of shrink sleeve.

On-Line Web Width Measuring System

Adopted with a high resolution CCD Camera for measuring the width of various films, reels and shrink sleeves such as PVC, PET, OPS, SBC. The qualified width can be set and the system will display the width variation all the time. The accuracy can reach to 0.1mm; all the defect position will be memorized. The operator can handle the defects after whole checking process finished.

■ Web Width(mm) 50 - 250

■ Inner Diameter (mm) 76 / 3" or on request

■ Winding Diameter(mm)(max.) 700

■ Mechanical Speed[m/min.] 0 - 250

FSR Reversible Rewinding Machine

FSR-300 Reversible Rewinding Machine is designed for rewinding operation of slit rolls, reels with uneven edge, or tension. Especially for rewinding on films with laminating paper, aluminum foil and other paper rolls after slitting.

Features:

>>Cantilever designed for easy operation, single operator is required to operate the machine.

>>Twin servomotors drive system providing accurate control.

>>Equipped with high performance PLC micro-processor combined with a LCD touch screen.

>>20 sets of length memories and auto stop function.

>>The winding direction could be changed in any time and forward / reverse jogging functions.

>>One machine with two functions: Install an optional stroboscope light becomes a doctor machine.

■ Mechanical speed : 0-250 m/min

■ Unwind width : 300, 350mm

■ Unwind diameter : 600mm (Max.)

■ Rewind Diameter : 600mm (Max.)

Bag Making Machine For Static Shielding Bag& Medical Pouch

The FSC-503-1 Static Shielding Bag / Anti-Static Bag Making Machine is designed for producing Static Shielding Bag, Anti Static Bag which protects electronic devices from ESD and electrostatic fields.

>>Static shielding film bag making machine: This machine employs a servo control system giving high accuracy and high efficiency performance. Sealing time delay control provides excellence sealing quality for thick material. Superior static shielding performance is thus assured.

The FSC-503-2 Medical Pouch Making Machine is designed for producing Medical Pouch, Medical Roll used in the medical and pharmaceutical industries.

>>Medical bag making machine: High precision servo control system. Two unwinders construction makes it suitable for two layers of different materials and multi-line production which upgrades efficiency greatly. Twin shaft type rewind stand can wind the bags into several rolls.

Material Width [mm] 300-1000

Material Diameter [mm] [max.] 500

Bag Length [mm] 150-500

Bag Width [mm] 50-400 (FEEDING LENGTH)

Mechanical Speed [bags/min.] 30-130

Production Line Multi-Lanes

FCC Servo Sheeting Machine

Suitable for all types of plastic, paper, electronics, computer and optical materials, film roll and foil roll, sheeting operation.

Features: High accuracy of positioning and cutting ensured by numerically controlled DC servomotor. Computerized control reduces errors to a minimum. High quality steel knives ensure clean cutting and a long service life. Heat flattening device, photocell, auto-control, embossing and pouching are available upon request.

▲ Eliminating the conventional bothersome change of length of cut, the machine employs convenient key adjustment.

▲ Servo drive transmission system provides convenient operation and maintenance, with low noise running.

■ Mechanical speed : 10-100 pcs/min (30m/min Max.)

■ Unwind diameter : 600mm

■ Product length : 2-9999mm (Max.)

■ Product width : 200-1000mm

FKSC Bag Making Machine(Center Seal Bag/Four Side Seal Bag)

The FKSC Series Bag Making Machine is designed for sealable multi-layer materials or co-extrusion films such as laminates of Polyester, BOPP, and CPP...This machine is ideal for the production of center seal bag, side gusset bag, four side sealing bag, etc.

Features:

1. Horizontal unwind stand equipped with web guiding system provides accurate control for edge smoothness.

2. Unwind stand gusseting device; only 3 pieces of mold plate are require to finish all sizes of gusseting.

3. Equipped with 3 sets of bottom sealing device and 1set of bottom sealed cooler. The sealing temperatures

could be set independently and each sealing area could be sealed twice. It improvers the sealing quality and

greatly upgrading production speed.

4. The embossing plate used for center and bottom sealing is automatically raised when machine is stopped.

This mechanism is designed to prevent the material overheating. (Patent No. 42360)

5. The machine employs a contrast scanner combined with a servo system for accurate positioning.

It eliminates repetitive error on sealing position, yet provides high cutting accuracy.

6. Micro-computer control system functions: auto counter, auto stop indicator, accumulative recorder,

photocell ineffective auto stop, skip seal can reach 15 times, alarm messages display…

7. Newly developed model FKSC-V series; equipped with main drive servo control, outside transmission

mechanism, high-quality MES mechanical and electrical integrated controller, LCD colorful touch screen,

auto temperature controller…

■ Mechanical speed : 150 bags/min

■ Materical width : 120-820mm

■ Materical dia. : 450mm (Max.)

■ Bag width : 50-400mm

■ Bag length : 50-400mm

FP Shrink Sleeve Seaming Machine (Glue Sealing Machine)

Shrink label Glue Sealing Machine Designed for the center seaming operation of shrink sleeves such as PVC, PS, PET, and POF...

Features:

1. Built with heavy-duty frame to ensure high speed gluing operation.

2. Cantilevered unwind & rewind air shafts for fast roll changeover.

3. Equipped with web guiding system provides the accuracy gluing position.

4. Sleeve width adjusting device: no need for forming mold plate when sleeve width over 50mm, bring down the production cost.

5. Employs micro-computer control system with colorful touch screen.

6. Auto tension control for unwind & rewind provides stable tension during operation.

7. Glue flow adjusting system: the flow of glue is automatically match up with the machine speed varies.

■ Mechanical speed : 0-200 m/min

■ Material width : 110-520mm

■ Unwind diameter : 500mm (Max.)

■ Rewind diameter : 700mm (Max.)

■ Sleeve width : 50-250mm (Min.)

FSC-201 High Speed Cutting Machine

* This cutting machine is suited for perforating and cutting operations for various shrink labels (shrink sleeves). It provides flexible cutting profiles of the product.

* Also for electronics, computer and optical materials, film roll and foil roll cutting operations.

Features:

1. Replaceable unwind device is suited for five-claw coreless and 3" paper core. 2. Servomotor drive assures high positioning accuracy for cutting. 3. Micro computer control system. 4. Employs a German made photocell sensor for accurate detection. 5. Product conveyor. 6. Equipped with static electricity removing device.

7. Product perforation & rewinding device. (Optional)

■ Mechanical speed : 30-350 pcs/min

■ Length of product : 10-2000mm

■ Width of product : 30-200mm

■ Working speed : 35 m/min(Max.)

■ Unwind diameter : 700mm

FSC-303 Three Step Sealing and Cutting Machine

Suitable for the 3 steps sealing operation for one side sealing bag, gusset and center sealing bag, zig-zag cutting bag, hole punching bag and notch punching bag.

Features:

1. Three-steps sealer design (1. upper and lower heating 2.upper heating 3. water cooling); producing an

airtight seal. Especially for poly bags which thick and hard to seal.

2. Accurate positioning for sealing and cutting is achieved by use of a contrast scanner.

3. Micro computer functions: auto counter / accumulative recorder / auto-stop indicator / auto-stop for

malfunctions / skip seal can reach 9 times...

4. Material feeding control by servomotor increase production accuracy and speed.

5. Rugged construction throughout makes this one of the most practical machines on the market.

■ Mechanical speed : 30-130 bags/min

■ Material diameter : 700mm(Fire-claw coreless)

■ Bag length : 50-400mm

■ Bag width : 30-300mm

FSC-G Rigid Film Flatten and Sheeting Machine

Designed to flatten and slice various kinds of plastic and paper. Maximum thickness of materials can reach 2mm.

Finished products can be neatly flattened and smoothed. This unit employs an automatic thermo-controlled heated oil circulation system. Numerically controlled jog motor provides very accurate positioning and cutting, and reduces errors to a minimum. Special alloy blade provides clean and long lasting cutting performance. Photocell controller is available upon request.

▲ The cutter is hydraulically controlled without further adjustment for cutting thick and thin materials.

▲ The heating roll employs a hot kerosene circulation system for energy and cost saving performance.

▲ The cutter is specially guarded for maximum operator safety.

■ Mechanical speed : 10-50 pcs/min

■ Unwind diameter : 600mm (Max.)

■ product length : 0-9999mm

■ product width : 200-1000mm

FTSC Pouch Making Machine(3 Side Seal/Stand-Up/Zipper Pouch)

FTSC-V Pouch Making Machine For Three Side Seal Bag / Stand-Up Pouch / Zipper Pouch

Suitable for sealable co-extrusion films, multi-layer films such as laminates of Polyester,BOPP and CPP... The FTSC-V Pouch Making Machine is ideal for the production of 3-side sealing bag, stand-up pouch, bottom gusseted stand-up pouch, zipper pouch, combined stand-up/zipper pouch.

Features:

1. This machine employs a special control for flexible operations allowing the product length to be increased to 2,000mm. It is capable of producing multi-sealing bags and multilane sealing bags and zig-zag bags..etc.

2. Product length setting is accurately controlled by servo motor incorporated with a contrast scanner for greatly upgrading production speed.

3. Main drive is controlled by servo; the operator can change the feeding and sealing time for each material independently. Sealing temperature adjustment unnecessary while machine speed up. This function can reduce waste material.

4. The embossing plate used for side and bottom sealing is automatically raised when machine is stopped. This mechanism is designed to prevent the material overheating. (Patent No. 42360)

5. Both side printed film adjusting device; it can eliminate the printing variations between upper and lower films. This device avoided producing defective bags.

6. Double cut function can eliminates burrs on in-line corner or notch puncher. It improves the value of bags.

7. Simple figure display for setting, easy operation; the automation man-machine system collocate with high-quality MES mechanical and electrical integrated controller and LCD colorful touch screen.

■ Mechanical speed : 150 bags/min

■ Material width : 300-1000mm, 400-1200mm

■ Material diameter : 600mm

■ Bag length : 30-400mm

■ Bag width : 150-500mm, 200-600mm (Minimum 75mm Multi-Lane)