* Show Highlight PROTECTOR-HR

PROTECTOR-HR is a metal separator with highest scanning sensitivity, designed for installation at the inlet of an injection-moulding machine and for the protection of high-performance moulds, e.g. for bottle caps with up to 96 cavities (mould nests) and more.

* Show Highlight PROTECTOR-XHT

PROTECTOR-XHT is a metal separator in high-temperature version for a processing temperature of max. 200ºC. The separator is installed directly at the inlet of an injection-moulding machine or after the dryer, and thus inspects all the fed materials at the Last Chance Control Point.

EXTRACTOR-J

EXTRACTOR-J is a magnetic separator for Jacob pipelines. It inspects granulates of up to 10 mm.

EXTRACTOR-SE

EXTRACTOR-SE is a magnetic separator for higher material throughputs and larger column diameters (40 - 120 mm) and particle sizes (8 - 10 mm). The EXTRACTOR-SE is installed at the feedstock intake of injection-molding machines, and is used to separate out ferrous metals from heavily contaminated feedstock.

GF

These metal separators are designed to be installed in horizontal, vertical or inclined vacuum and pressure pipes. Detection and removal of contaminants is effective even at high speeds and rejected material is removed into a container with no interruption to material flow.

GM

The GM permanent magnet system is available in round, square or rectangular configurations and can therefore be integrated into practically any type of application.

GMT

An economical permanent magnet system installed at the feedstock intake of the extruder, the GMT eliminates larger particles of ferrous metals to produce a higher quality product and reduce expensive repairs.

MAGBOX-MXP

MAGBOX is a magnet system to separate even smallest contaminants. It can be easily integrated into existing pipelines.

PRESEP

The metal separation unit PRESEP is designed for highly contaminated material; neodymium magnets first separate all metallic contaminants before the metal separator removes all non magnetic contamination.

SAFEMAG

SAFEMAG is a robust magnet system in a low-profile (60 mm) configuration that is especially suited to restricted areas. The SAFEMAG is installed just above the feedstock intake of the injection-molding machine. Its unique design means that no plastic material is deposited on the device.

SAFEMAG+PROTECTOR

SAFEMAG+PROTECTOR is the optimal combination for separating magnetic and non-magnetic metal contaminations in plastics processing. The SAFEMAG magnet separator removes all magnetic contaminations. The PROTECTOR reliably detects and separates all the remaining non-magnetic metals.

Tunnel Metal Detector DLS

DLS tunnel metal detectors are separable and can be easily installed on either new or existing conveyors. They are particularly suitable for inspecting tall materials as detection accuracy remains consistent across the entire aperture. A typical application is the protection of cutting mills and shredders.

Contaminant separators

Contaminant separators identify plastics and automatically separate foreign polymer from a stream of bulk.